지금 회원 가입 시 즉시 할인 쿠폰이 지급되어
결제페이지에서 바로 사용하실 수 있습니다.
상품명 | [숲속의 샘]골드랜드 라바카/과학영재반/교재교구/방과후교재/골드버그 |
---|---|
판매가 | 12,000원 |
배송비 | 3,500원 (50,000원 이상 구매 시 무료) |
상품코드 | P0000CPQ |
공급사 | 숲속의샘 |
SNS 상품홍보 | |
---|
구매방법 | |
---|---|
배송주기 |
정기배송 할인 save
|
옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
[숲속의 샘]골드랜드 라바카/과학영재반/교재교구/방과후교재/골드버그 | 12000 ( 0) | |
|
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
① Making rubbercar body
1.Fold the body along the fold line as shown.
2. Align the hooks on the front and back of the body.
3. Align the grooves on the front and back of the body and secure with snap buttons.
② Assembling the rubbercar bottom plate
1. Fold both sides along the folding line of the bottom plate.
2. Place the body on the bottom plate with the front and back sides aligned as shown.
3. Align the grooves on both sides of the overlapping body and fix with the snap button.
*Do not fix the second groove on the side.
1. Fold the front wheel fixing plates as shown.
2. Fold the fixing plate into the groove on both sides of the front wheel and fix it with the snap button. (two)
3. Put a long white rod in the front groove of the body and secure both sides with a rubber ring.
4. Insert the front wheel into the white rod and secure it with the rubber ring.
*Fix the rubber ring on the front wheel so that it does not stick too much.
1. Fold the rear wheel fixing plates as shown.
2. Fold the fixing plate in line with both grooves on the rear wheel, and fix it with the snap button.(two)
*Fix it to the outer groove of the rear wheel.
1. Fold the rear axle as shown.
2. Align the groove on the rear wheel axle and fix it with the snap button.
1. Insert the rear wheel groove into the rear wheel axle protrusion groove.
2. Fold the protruding grooves and secure with the snap button.
3. Insert the rear wheel axle into the rear of the body.
4. Assemble the other side in the same way.
1. Fix the transparent rod support to the upper groove of the body with the snap button.
⑧ Completing rubbercar
1. Insert the rubber band into the groove in the center of the rear wheel as shown.
2. Hang a short white rod on the rubber band to fix it to the hook.
3. Take out the rubber band from the opposite rear wheel.
Then insert four paper washers.
4. Hang a transparent rod on the rubber band.
5. Put a black rubber ring at the end of the transparent rod.
⑨ Operating rubbercar
1. Hold the rear wheel without the transparent rod and turn the transparent rod 10 times in the counterclockwise direction.
2. Hold the wheel so that it does not loosen, and move the support to hang the transparent rod.
3. Let's put the rabaca on the floor.
⑩ Connecting with a Goldberg device
1. Hang the rubber ring of the transparent rod on the front of the chu chu rail.
* When the chu chu rails work, the rabaca moves while pushing the transparent rods.
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다